To date, Leber has successfully completed work and supplied products to many clients, including government customers, contractors and large developers. Leber's playgrounds are located in courtyards and parks in many districts of Moscow and municipalities of the Moscow region.
districts of Moscow
Well-established technological processes
To assist in the selection of optimal elements for the playground, as well as to prepare technical documentation for the tender, the company’s constructors and designers are always ready to create a visualization of the customer’s site. At the same time, the Leber library contains dozens of ready-made proposals for sites of various sizes.
Leber products meet high safety requirements for children's play equipment. All play complexes are adapted for installation in open public areas. The design and production of products is carried out on the basis of state standards and the Technical Regulations of the Eurasian Economic Union.
Equipment and coverings for playgrounds. General safety requirements and test methods.
P.4.2.5. — Protruding nails, loose ends of steel ropes or sharp parts are not allowed.
P.4.2.5. — Corners, edges and parts protruding more than 8 mm within the space occupied by the user and not protected by adjacent areas located at a distance of no more than 25 mm from the end of the protruding part must be rounded.
П.18.104.22.168. — При установлении на трапах и лестницах поручней, перил или ограждений они должны начинаться с самого низкого уровня трапа или лестницы.
П.4.2.4. — Для защиты детей от падения с оборудования оборудуют перила и ограждения.
Оборудование не должно допускать застревание головы, шеи, частей тела и одежды ребёнка.
Equipment and coverings for playgrounds. Additional safety requirements and test methods for swings.
Equipment and coverings for playgrounds. Additional safety requirements and test methods for slides.
P.4.2. — On slides with a free fall height of more than 1000 mm, a handrail or crossbar must be provided across the opening.
P.4.4.3. — The sides of the starting section must be solid along the entire length and be a continuation of the sides of the sliding section and have a height of 100 to 500 mm.
P.4.5. — The slides must have a final section with a radius of curvature R>50 mm and a height above the ground surface from 200 to 350 mm.
P.4.9.1. — Closed sections of tunnel slides must have a minimum internal height and a width of at least 750 mm.
Equipment and coverings for playgrounds. Additional safety requirements and testing methods for ropeways.
Equipment and coverings for playgrounds. Additional safety requirements and test methods for carousels.
Equipment and coverings for playgrounds. Additional safety requirements and test methods for rocking chairs.
Equipment and coverings for playgrounds. Additional security requirements and testing methods for spatial gaming networks.
GOST R 55677–2013
Equipment for children's sports grounds. Design safety and test methods.
GOST R 55678-2013
Equipment for children's sports grounds. Design safety and testing methods for sports and developmental equipment.
GOST R 57538–2017
Stationary outdoor exercise machines. General safety requirements and test methods.